Carmatech Nemesis NIPS (Nemesis Interlocking Projectile System) Muzzlebrake Kit (4 pieces)

The new Carmatech NIPS - N emesis Interlocking Projectile System ensures an even more precise shot pattern by narrowing the trajectory of the bullet before it leaves the barrel and thus stabilizing it. This effect is particularly evident when shooting at very long distances. Barrels with the NIPS upgrade are even more precise than the already very accurate Carmatech Nemesis barrels.

In addition, the shot noise is dampened by the new bore, i.e. the marker is a bit quieter, which makes it even easier for snipers to remain undetected.

The NIPS system is delivered with 3 muzzle brakes in the bore sizes .6855 (+/- 0.005), .6895 (+/- 0.005) and 6935 (+/-0.005), as well as a screw-on thread protection cap, which also gives the muzzle brake a nicer look gives.

There is a thread in the rear part of the muzzle brakes, with which the NIPS muzzle brakes can be screwed onto any Carmatech Nemesis barrel, as well as other barrels with an identical front thread.

If you have too much tolerance between barrel and projectile / paintball, you can screw up to 3 NIPS muzzle brakes in a row. This gradual narrowing then gently centers the bullet trajectory until the bullet exits the barrel with significantly less lateral movement. This ensures a more even and accurate shot pattern.

Scope of delivery of the Carmatech NIPS - Nemesis Interlocking Projectile System Kit:

1x NIPS muzzle brake 6855 (+/- 0.005)

1x NIPS muzzle brake .6895 (+/- 0.005)

1x NIPS muzzle brake 6935 (+/-0.005)

1x thread protection cap for NIPS Muzzlebrake

Product video for Carmatech Nemesis NIPS (Nemesis Interlocking Projectile System) Muzzlebrake Kit (4 pieces)

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube immer entsperren