Make your marker lighter, use a tube system ...
Many paintball players, the marker is simply too heavy. Considering that with Marker, Hopper and HP system in the end a total weight of 2.5Kg, up to 5Kg on Woodlandmarker, comes together, this is quite understandable. A remote hose system can remedy this, because it allows the compressed air cylinder to the back of the player, in the so-called
Battlepack or
vest to lay.
The pressure from the HP system is passed through the Paintball Remote System, or even Mamba Remote System, all the way to the marker. The Schlaechtue weigh only a few hundred grams, are stretchable up to 1.5 meters in length and very flexible. This makes it much easier for the player to handle his weapon.
For example, if your marker has an ankle rest, a tube system is always an advantage. For tournament markers, the HP bottle is used as a kind of shoulder rest. With
Woodlandmarkierern this is not necessary, since they usually have their own shoulder rest. So you would lead the bottle under the shoulder rest. This is not only difficult, it also looks just stupid and distorts the replica look of the marker, which is what most players are looking for.
What should I consider when buying a hose system?
One should pay particular attention to Qaulität and processing. The remote system is part of the high pressure equipment of the marker and should therefore be of good quality, after all, a pressure of up to 55 bar flows through the hose.
If you buy a cheap remote system, it may end up that the quality, and thus the security of the player suffers. Good hoses last about three times the pressure with which they are operated. For example, all remote systems sold by us meet the standard that the hose can withstand 3000PSI / 300 bar inflation pressure. Since the currently strongest regulator models have only an outlet pressure of 1100 PSI, the hoses are more than sufficiently strong and safe. There is nothing worse on the field than when a hose bursts and then hurls the player in the face with high pressure.
Attention! - There are some significant differences in remote systems.
There are many different model ranges in paintball hose systems. The simple models are intended only for the flow of gas to the marker, others have additional features such as shut-off valves, pressure gauge and quick couplings. Also, the diameter of the tube may vary. There are small diameter holes (about 3-5mm) and the big systems that have an inside diameter of 6mm or an outside diameter of 10-12mm.
With us you will always receive a large selection of different, current paintball remote systems, with optional slide check, on / off switch and quick release.